Atish Chemicals

AT-TREAT 3100 – Acrylic  Terpolymer(AA/AMPS/SHP)
Water Hydrophilic
APPLICATION: -
AT-TREAT-3100 is used in Industrial water treatment and agriculture industries where water holding capacity of soil increases.
AT-TREAT-3100is a Poly-acrylic terpolymer. This polymer is used into Textile industry as a Dye fixing agent.
AT-TREAT-3100this product will form a sticky layer on mud and will form a complex and due to it’s hydrophilic nature water will get hold by it to some extentAT-TREAT-3100 is useful in textile industry for dye dispersing agent, anti-backstaining agent.Anti-precipitation performance 
AT-TREAT-3100polymer is a general purpose scale inhibitor as it is effective to prevent scale building in inhibiting precipitation and deposition of calcium carbonate, calcium oxalate, calcium sulphate, barium sulphate and other low solubility salts.
MAJOR BENEFITS:-
ü  AT-TREAT-3100exhibits exceptional stability in the presence of hypoclorite.
ü  AT-TREAT-3100 excellent control of CaCO3, CaSO4 scale deposition in cooling water treatment, boiler water treatment, RO formulations, and sugar millantiscalent and textile auxiliaries.
ü  AT-TREAT-3100is phosphorus free, hence does not give much load oneffluent treatment.
ü  AT-TREAT-3100also has excellent hardness chelation capabilities and isused as a chelating polymer in textile auxiliaries. It works as anti-backstainingagent, does not allow mud to redeposit on the cloth.
ü  AT-TREAT-3100works as an excellent dispersion of clay, silt, precipitatesand soil
ü  AT-TREAT-3100is having High Ca chelating value
ü  AT-TREAT-3100complexes hardness salts without affecting the dye shadewhen used in dye baths as a chelating polymer
ü  AT-TREAT-3100shows low dosages at activity over a wide range of pH hardnessand temperature without precipitation.
ü  AT-TREAT-3100product has good stability to oxidizing agent like chlorine. 
ü  AT-TREAT-3100terpolymer is the product of choice for boiler water treatment formulations as it provides unsurpassed control of boiler sludge. The polymer makes it possible to easily transport iron with calcium and phosphate containing sludges for removal during blow down. Superior iron oxide dispersant.  
ü  AT-TREAT-3100Excellent calcium phosphate inhibitor & excellent thermal & chemical stability widely used in cooling water for phosphate/zinc or all-organic treatment programmes. 
ü  AT-TREAT-3100is used in steel plants to prevent sediment of ferric oxide.
ü  AT-TREAT-3100is having chelating / sequestration value of about 400-450 mg/gm of sample
 

We offer Phosphino Carboxylic Acid 45%.
 Typical Physical Properties These properties are typical but do not constitute specifications.
Appearance :Clear to slightly hazy liquid
Solids: 45% 
pH 3.0-4.0 
Molecular Weight1 3300-3900
Specific Gravity 1.20 Max.
Used in Boiler Water, Cooling Tower, Pulp and Paper Industry.  as ANTISCALANT/  Scale Inhibitor formulations.

AT-200
 (Polymaleic acid)
Water route PMA
PRODUCT FEATURES: AT -200 is low molecular weight maleic homopolymer. It is a highly effective dispersant and scale inhibitor in cooling water treatment, boiler water treatment, reverse osmosis systems and many other scale control applications such as in textile dyeing, water injection systems in oil fields and sugar mill evaporators.
Due to its high penetration value, ingredients of the formulations always perform very effectively.
 
AT-200 is excellent for controlling CaCO3 and CaSO4 scale formation under aggressive conditions. Due to its high threshold effect and crystal distortion properties, scales formed in presence of AT -200 tend to be highly distorted and are easily washed away by flow of water. AT200 is characterized by its low polydispersity and low residual monomer content. AT- 200 is thermally stable, stable to chlorine and oxidizing biocides at normal use levels. When used in fertilizer formulations, it acts effectively as “Nitrogen Builder.”
 
Product Specifications – Typical values
Appearance : Clear yellow to amber liquid
Nature : Maleic homopolymer
pH (as is) : < 2
Solid Content : 48-50 %
Sp. Gravity @ 25 deg C : 1.18 – 1.20
Avg. Molecular Weight : 500-1000
BF Viscosity cP @ 25 deg C : 10-35
Solubility in Water : Freely soluble
 
MAJOR BENEFITS
• Controls CaCO3 and CaSO4 scaling under aggressive conditions
• Effective for silica control
• Phosphorous free
• Stable at all pH
• Easy to formulate 
 SAFETY AND HANDLING :
AT- 200 is generally safe but avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of  contact with eyes, flush with water and get prompt medical attention. Gloves and goggles should be used while handling the product.
 
STORAGE:  AT -200 is non-flammable, non-combustible. It should be stored under shade. The product should not be exposed to direct sunlight.
 
PACKING: 60 kg HDPE carboys, 250 kg HDPE Barrels.

As a leading name in industry, we are engaged in processing, supplying and whole selling high grade acrylic polymers. These polymers are available as follows
1) Acrylic Homo polymer
2) AA/AMPS (Co polymer)
3) Terpolymer (AA/AMPS/NI , AA/AMPS/HPA ETC.
4) Acrylic /Maleic anhydride Homo polymer, Co polymer etc
5) Polymaleic Acid 50%
6) Sodium Polyacrylate 25%, 48%, 50% Solids.

Used in Water treatment dispersant, RO Antiscalant, Textile Industry, Cooling Tower Chemicals, Boiler, Sugar Evaporator scale inhibitor etc.
 

It is a clear colourless liquid having pH less than 1. it is use for water treatment chemicals as well as different types of Aniscalant. One can Make Different Formulations Along with HEDP or PBTC or ATMP.

PRODUCT FEATURES AT 200 is low molecular weight maleic homopolymer. It is a highly effective dispersant and scale inhibitor in cooling water treatment, boiler water treatment, reverse osmosis systems and many other scale control applications such as in textile dyeing, water injection systems in oil fields and sugar mill evaporators.  Due to its high penetration value, ingredients of the formulations always perform very effectively.   AT-200 is excellent for controlling CaCO3 and CaSO4 scale formation under aggressive conditions. Due to its high threshold effect and crystal distortion properties, scales formed in presence of AT -200 tend to be highly distorted and are easily washed away by flow of water. AT200 is characterized by its low polydispersity and low residual monomer content. AT- 200 is thermally stable, stable to chlorine and oxidizing biocides at normal use levels. When used in fertilizer formulations, it acts effectively as “Nitrogen Builder.” Product Specifications – Typical values Appearance : Clear yellow to amber liquid  Nature : Maleic homopolymer  pH (as is) : < 2  Solid Content : 48-50 %  Sp. Gravity @ 25 deg C : 1.18 – 1.20  Avg. Molecular Weight : 500-1000  BF Viscosity cP @ 25 deg C : 10-35  Solubility in Water : Freely soluble  MAJOR BENEFITS  • Controls CaCO3 and CaSO4 scaling under aggressive conditions  • Effective for silica control  • Phosphorous free  • Stable at all pH  • Easy to formulate   

We offer Terpolymer Used in Cooling Tower Scale Inhibitor, RO Antiscalant, Antiscalant etc.
Solids: 44%
Wt/Ml: 1.20
Colour: Clear To Pale Yellow Liquid.
Packing: 50, 60Kg hdpe Carboy.
 
We also provide Acrylic Co-Polymer 43.5%, Homopolymer 48%,  Acrylic/Maleic co-polymer, Polymaleic Acid 50% etc. 
generaly used in water treatment chemicals, agrochemicals.etc.

It is sodium sort of Acrylic Acid. Generally use in Water treatment Chemicals, RO Chemicals, Construction Chemicals, Boiler Chemicals As An Antiscalnt Or Dispersant.